RCA TruFlat 27F500TDV User Manual

Also see for TruFlat 27F500TDV: Technical specifications

Contents

59No reception abovechannel 13.Problems and troubleshootingUse the following check list for troubleshooting when you have problems with your unit. Consult your localdealer or service outlet if problems persist.Be sure all connections are properly made when using with other units.SYMPTOMS CAUSE POSSIBLE SOLUTIONS PAGETry another channel.Check picture control adjustments.Check for source of reception distur-bance.Check CATV connection or VHF/UHFantenna, reposition or rotate antenna.Try another channel.Check picture control adjustments.Check for source of reception disturbance.Check CATV connection or VHF/UHFantenna, reposition or rotate antenna.Try another channel.Check CATV connection or VHF/UHFantenna, reposition or rotate antenna.Try another channel.Check all CATV connections.Set the TV/CATV Menu option to theCATV mode.Contact your Cable TV company.Make sure TV/CATV menu option is inthe appropriate mode.Check UHF antenna.Try another channel.Check CATV connection or VHF/UHFantenna, reposition or rotate antenna.Check for source of reception disturbance.Check the MUTE button has not beenpressed.Tune new channel.Set Sleep Timer to "0".Try another channel.Check CATV connection of VHF/UHFantenna, reposition or rotate antenna.Press the CLOSED CAPTION button toturn on the closed caption.TV station experiencing problems.Picture control is not adjusted.Possible local interference.Antenna (CATV) connector is not connectedor possible local interference.TV station experiencing problems.Picture control is not adjusted.Possible local interference.Antenna (CATV) connector is not connectedor possible local interference.TV station experiencing problems.Antenna (CATV) connector is not connectedor possible local interference.Cable TV channel is scrambled.CATV connector is not connected.TV/CATV Mode menu option is set to theTV mode.Cable TV service interrupted.TV/CATV Mode menu option is not set tothe appropriate mode.UHF antenna is not connected.TV station experiencing problems.Antenna (CATV) connector is not connectedor possible local interference.Possible local interference.The MUTE button is depressed.The AC power cord is not connected.Cassette or disc is not inserted.The TIMER REC buttons are depressed.No power.Closed caption is notactivated.TV shuts off.Poor or no picture.Poor or no sound .No CATV reception.Picture wobbles or drifts.Poor or no color.Although the power is on, theunit does not operate.Connect the AC power cord to the ACoutlet.Insert a video cassette or disc.Press the TIMER REC buttons.POWERTV BROADCAST RECEPTION531, 453819296111, 1219296111, 121911, 121912221222111911, 12612019201911, 1221The video cassette's erase prevention tabis broken off.The time is not set correctly.The recording start/end time is not setcorrectly.Tape is old or worn.Tracking adjustment is beyond range ofautomatic tracking circuit.Video heads are dirty.Timer recording does notwork.TV recording does not work. Place a piece of adhesive tape over thehole.Reset the present time.Reset the start/end time.Replace the tape.Adjust tracking manually using theTRACKING +/– buttons on the remote control.Clean the video heads.3116~183860VCRThe CLOSED CAPTION button is notdepressed.TV signal is weak.TV station experiencing problems or programtuned is not closed captions.Sleep timer is set.TV station stopped broadcasting.Noise bars appear on thescreen.–33