RCA TruFlat 32F530T User Manual

Also see for 36F530T - 36" TruFlat TV: Brochure & specs Manual Del Usuario

Contents

RCA TruFlat 32F530T User Manual Manual pdf 9 page image

Chapter 1 7Graphics contained within this publication are for representation only.Connections & SetupP RP BR-AUDIO-LVIDEOYCABLE/ANTENNAG-LINKR LFrom Cable,Cable Box,or AntennaINPUT2R-AUDIO-LVIDEOINPUT1AUDIOOUTVCR03CHANNELSENSORSENSORConnect to G-LINK jackon the back of the TV.TV (back panel)S-VIDEOWhy You Should Connect This G-LINK CableThe G-LINK cable enables the GUIDE Plus+ system (the on-screen interactiveprogram guide) to work with your VCR and/or cable box.Cable Box – If your TV is connected to a cable box you must connect theG-LINK cable to receive TV program listings for your area, and to tunedirectly to a channel when the program guide is on your TV screen.VCR – If your TV is connected to a VCR and you don’t connect the G-LINKcable, one-touch VCR recording won’t work. The other features of the guidewill work properly.G-LINK wandsG-LINK cableHow to Find the Remote SensorYou have to place the G-LINK wands in front of the remote sensor on the VCR and/or cable box. Some cable boxes and VCRs have the remote sensor labeled on theunit. If the remote sensor isn’t labeled on your VCR and/or cable box, you need touse the remote control that came with the VCR and/or cable box to locate thesensor.1. Turn off the VCR and/or cable box.2. Hold the remote control (not the one that came with your TV, but the one thatcame with the cable box and/or VCR to which you’re attaching the G-LINKcable) so that it is touching the front of the component.3. Slowly move the remote control across the front of the component (VCR orcable box) while you press the power button on and off. You must press andrelease the power button each time you move the remote (holding down thebutton won’t work).4. When the component turns on, you’ve located the remote sensor.Placing the G-LINK WandsPlace the G-LINK wands in front of the remote sensor on your VCR and/or cablebox approximately one inch away from the remote sensor.