RCA drc 8335 User Manual

Also see for DRC8335 - DVD Recorder & VCR Combo: Specification sheet Specifications Quick start guide User manual

14Watching TV programsWatching images from connected devicesWatching TV programsIn order to use the features of the unit, you will have to getused to turning on the unit to watch TV.1. Turn on your TV set and unit. After a few secondsthe main menu of the unit appears on the televisionscreen.2. The “Live signal” function is already highlighted. PressOK to tune to the last channel watched.• To display information on the current channel, pressINFO.3. To change channel:• On the remote control – press CH+/CH– or the numberbuttons to input the channel numbers (read note on theright for details).• On the unit – press SKIP CH+/SKIP CH–.Watching images from connecteddevicesTo select viewing a device connected to your unit (e.g.satellite receiver, camcorder), press INPUT on either the unitor remote control to show the action bar at the bottom ofthe screen. Select the input source (DV, AV1, AV2 or Tuner)by pressing or and then OK.• When viewing ATSC broadcasts, press INFO andthen or to select and display the informationon the current channel.• Press AGAIN/GO BACK to switch between thecurrent and the last tuned channels when watchingTV.When using the number buttons to change channel:1. Input firstly the channel number.2. Press .3. Input the index number. Input “000” for analog (NTSC)channels4. Press OK to tune to the channel.For example, to tune to channel 003-012, press “3”, , “1”,“2” and OK.If you only input the channel number and then press OK, theunit will perform channel search for all the channels startwith the selected channel number (in the above example, allchannels start with 003-XXX). The first channel of theselected channel number will be tuned to.DRC8335_EN(verB) 7/23/07 3:36 PM Page 16