REED R2320 Instruction Manual

Contents

REED R2320 Instruction Manual Manual pdf 9 page image

9www.REEDINSTRUMENTS.comOperating InstructionsPower ON and OFF1. Gently pull the trigger to turn the thermometer on. The LCDdisplay and the backlight will turn on.2. The thermometer will automatically shut off after 15 secondsof inactivity.Manual Measurement1. Pull and hold the trigger after aiming at the target. The iconwill flash, indicating that the target temperature is being measured.2. When the trigger is released, the icon will disappear and theicon will appear indicating that measurement has stoppedand the last measured temperature will remain on-screen untilanother measurement is taken or the unit turns off.Continuous Temperature Measurement (Trigger Lock)The instrument allows for a continuous temperature measurement time tobe set from 1 minute to 5 hours. Refer to Trigger Lock Setup for details.Note: This function is applicable for processes that require regular moni-toring of temperature.1. Once the trigger lock function is enabled, the icon will appear onthe display and the SCAN icon will flash when the trigger is pressed.2. Pull the trigger again to stop measuring and both the and SCANicons will disappear and the HOLD icon will appear. The thermometerwill now hold the last measured value until the unit turns off after 15seconds of inactivity or until testing is resumed.3. When the continuous temperature measurement time is reached, thethermometer will automatically power off and save the last measuredvalue. You can view the last measured value by pulling the trigger.Note: The last measured value is cleared when a new test scan is started.continued...1.888.610.7664info@REED-Direct.com REED-Direct.com