REED R5010 Instruction Manual

Also see for R5010: Instruction manual

Contents

REED R5010 Instruction Manual Manual pdf 14 page image

reedinstrumentswww com 14Pantone 534 BluePantone 123 YellowPantone 485 RedPantone 123 YellowPantone 534 BlueBlack Rich Black -20/20/20/100Blue - 100/80/30/5Yellow - 0/27/100/0Red - 10/100/100/5Yellow - 0/27/100/0Blue - 100/80/30/5Only if you REALLY need them:Pantone 534 Blue - 100/80/30/5Pantone 485 Red - 10/100/100/5Temperature Measurement1. Set the function switch to the green Temp position2. Insert the Temperature Probe into the input jacks, making sureto observe the correct polarity3. Press the MODE button to indicate ºF or ºC4. Touch the Temperature Probe head to the part whose temperature youwish to measure. Keep the probe touching the part under test until thereading stabilizes (about 30 seconds)5. Read the temperature in the displayNote: The temperature probe is fitted with a type K mini connector.A mini connector to banana connector adaptor is supplied forconnection to the input banana jacks.Capacitance MeasurementWARNING: To avoid electric shock, disconnect power to the unitunder test and discharge all capacitors before taking any capacitancemeasurements. Remove the batteries and unplug the line cords.1. Set the rotary function switch to the green Ω CAP2. Insert the black test lead banana plug into the negative COM jack.Insert the red test lead banana plug into the positive V jack3. Press the MODE button to indicate F4. Touch the test leads to the capacitor to be tested5. Read the capacitance value in the displayFrequency (Duty Cycle) Measurement (Electronic)1. Set the rotary function switch to the green Hz/% position2. Insert the black lead banana plug into the negative COM jack and thered test lead banana plug into the positive Hz jack3. Touch the test probe tips to the circuit under test4. Read the frequency on the display5. Press the MODE button to indicate “%”6. Read the % duty cycle in the display