REED R5010 Instruction Manual

Also see for R5010: Instruction manual

Contents

REED R5010 Instruction Manual Manual pdf 15 page image

reedinstrumentswww com 15Pantone 534 BluePantone 123 YellowPantone 485 RedPantone 123 YellowPantone 534 BlueBlack Rich Black -20/20/20/100Blue - 100/80/30/5Yellow - 0/27/100/0Red - 10/100/100/5Yellow - 0/27/100/0Blue - 100/80/30/5Only if you REALLY need them:Pantone 534 Blue - 100/80/30/5Pantone 485 Red - 10/100/100/5% 4 – 20mA Measurement1. Set up and connect as described for DC mA measurements2. Set the rotary function switch to the 4-20mA% position3. The meter will display loop current as a % with 0mA=-25%, 4mA=0%,20mA=100%, and 24mA=125%Autoranging/Manual Range SelectionWhen the meter is first turned on, it automatically goes into AutoRanging.This automatically selects the best range for the measurements beingmade and is generally the best mode for most measurements.For measurement situations requiring that a range be manually selected,perform the following:1. Press the RANGE key. The “AUTO” display indicator will turn off2. Press the RANGE key to step through the available ranges until youselect the range you want3. To exit the Manual Ranging mode and return to Autoranging, press andhold the RANGE key for 2 secondsNote: Manual ranging does not apply for the Temperature functions.Max/Min1. Press the MAX/MIN key to activate the MAX/MIN recording mode.The display icon “MAX” will appear. The meter will display and hold themaximum reading and will update only when a new “max” occurs2. Press the MAX/MIN key again and the display icon “MIN” will appear.The meter will display and hold the minimum reading and will updateonly when a new “min” occurs3. To exit MAX/MIN mode press and hold the MAX/MIN key for 2 secondscontinued ...