REED R5040 Instruction Manual

Also see for R5040: Instruction manual Instruction manual

Contents

REED R5040 Instruction Manual Manual pdf 10 page image

10www.REEDINSTRUMENTS.comTemperature Measurements1. To avoid electric shock, disconnect both test probes from any sourceof voltage before making a temperature measurement.2. Set the function switch to TEMP. Press the MODE button to changebetween °C and °F.3. Insert the Temperature Probe into the negative COM and thepositive V terminals, making sure to observe the correct polarity.4. Touch the Temperature Probe head to the area to be measured. Keepthe probe touching the part under test until the reading stabilizes(about 30 seconds).5. The LCD will display the reading.Note: To avoid electric shock, be sure the thermocouple has been removedbefore changing to another function.Non-Contact AC Voltage Measurements1. Set the rotary function switch to the V position.2. Touch the probe tip to the hot conductor or insert into the hot side ofthe electrical outlet. If AC voltage is present, the detector will light up.3. The conductors in electrical cord sets are often twisted. For bestresults, rub the probe tip along a length of the cord to assure placingthe tip in close proximity to the live conductor.4. The detector is designed with high sensitivity. Static electricity orother sources of energy may randomly trip the sensor.Min/Max RecordingWhile in Manual Range, select the proper range before selecting MIN/MAXto ensure that the MIN/MAX reading will not exceed the testing range.Press the MIN/MAX button to select the minimum reading. Press theMIN/MAX button again to select the maximum reading. Press the MIN/MAX button again to exit and resume normal measuring.Relative ModePress the REL button for Capacitance Zero & Offset Adjustment.continued...www. GlobalTestSupply .comind Quality Products Online at: sales@GlobalTestSupply.com