REED R5040 Instruction Manual

Also see for R5040: Instruction manual Instruction manual

Contents

REED R5040 Instruction Manual Manual pdf 8 page image

8www.REEDINSTRUMENTS.comOperating InstructionsAC/DC Current Measurements1. Set the rotary function switch to the1000ADC, 600ADC, 1000AAC, or600AAC range. If the range neededis not known, select the higher rangefirst then move to the lower range ifnecessary.2. Press the trigger to the open jaw andfully enclose one conductor.3. The LCD will display the reading.AC/DC Voltage Measurements1. Insert the black test lead into the negative COM terminal and the redtest lead into the positive V terminal.2. Set the rotary function switch to the V position, and select either ACor DC with the MODE button.3. Select Hz% or ACV with the Hz% button.4. Connect the test leads in parallel to the circuit under test.5. The LCD will display the reading.Resistance Measurements1. Insert the black test lead into the negative COM terminal and the redtest lead into the positive V terminal.2. Set the rotary function switch to the Ω position.3. Touch the test probe tips across the circuit or component under test.It is best to disconnect one side of the device under test so the restof the circuit will not interfere with the reading.4. The LCD will display the reading.continued...R5040 R5040www. GlobalTestSupply .comind Quality Products Online at: sales@GlobalTestSupply.com