REED SD-2010 Instruction Manual

Also see for SD-2010: Instruction manual

Contents

REED SD-2010 Instruction Manual Manual pdf 14 page image

reedinstrumentswww com 14one 534 Blueone 123 Yellowone 485 Redone 123 Yellowone 534 BlueRich Black -20/20/20/100Blue - 100/80/30/5Yellow - 0/27/100/0Red - 10/100/100/5Yellow - 0/27/100/0Blue - 100/80/30/5Only if you REALLY need them:ting as the default. To exit “Advanced Settings”, press the EscButton.Set sampling time1) When the lower display shows “SP-t”, use the Up or Down Buttonsto adjust the value to either 0, 1, 2, 5, 10, 30,60, 120, 300, 600,1800, or 3600 seconds.2) After the Sampling value is selected, press the press the Enter But-ton to save the setting as the default. To exit “Advanced Settings”,press the Esc Button.SD memory card FormatPlease Note: Formatting the SD card erases all data from that SD card.1) When the lower display shows “Sd F”, use the Up or Down Buttonsto select “yES” (format the SD card) or “no” (do not format the SDcard).2) To format your SD card, select “yES” and press the Enter Button.The Display will show “yES Enter”, to confirm. Press the Enter But-ton to confirm.PC Serial InterfaceThe instrument features an PC output via 3.5 mm terminal. The connectoroutput is a 16 digit data stream which can be utilized to the user’s specificapplication. An USB RS232 lead with the following connection will bewww.reedinstruments.com1-877-849-2127 | info@reedinstruments.com