REED SD-2010 Instruction Manual

Also see for SD-2010: Instruction manual

Contents

REED SD-2010 Instruction Manual Manual pdf 7 page image

reedinstrumentswww com 7one 534 Blueone 123 Yellowone 485 Redone 123 Yellowone 534 BlueRich Black -20/20/20/100Blue - 100/80/30/5Yellow - 0/27/100/0Red - 10/100/100/5Yellow - 0/27/100/0Blue - 100/80/30/5Only if you REALLY need them:Function selection1) Turn on the meter by pressing the Power Button. To turn the meteroff, hold the Power Button for over 2 seconds.2) The meter has 5 measuring functions to choose from: WBGT,WB, Dew Point, measurements, TG, Humidity measurements, AirTemperature. When the meter is on, press and hold the FunctionButton. The display will flash “_bgt” for WBGT measurements, “_b”for WB measurements, “dP” for Dew Point measurements, “tg” forTG measurements, “rH” for Humidity measurements, and “tA” forAir Temperature measurements. Release the Function Button tochoose the displayed function.WBGT Measurement1) Turn on the meter by pressing the Power Button. To turn the meteroff, hold the Power Button for over 2 seconds.2) Function select to “_bgt”. The upper Display will show the WBGTvalue. The lower Display will show the text “_bgt in” for indoors,or “-bgt out” for outdoors. While taking a measurement, press andhold the In/Outdoor Button to scroll between Indoor or Outdoormeasuring. Release the IN/Outdoor Button to make your selection.3) To set the WBGT alarm, please see the Advanced Settings section.WB Measurement1) Turn on the meter by pressing the Power Button.2) Function select to “_b”. The upper Display will show the WB value.The lower Display will show the text “_b”.Dew Point Temperature Measurement1) Turn on the meter by pressing the Power Button.www.reedinstruments.com1-877-849-2127 | info@reedinstruments.com