130 RabbitCore RCM3365/RCM3375C.8.4 KeypadThe functions used to control the keypad are contained in the KEYPAD7.LIB librarylocated in the Dynamic C KEYPADS library folder.Initializes keypad processRETURN VALUENone.SEE ALSObrdInitAssigns each key with key press and release codes, and hold and repeat ticks for auto repeat anddebouncing.PARAMETERScRaw is a raw key code index.1x7 keypad matrix with raw key code index assignments (in brackets):User Keypad InterfacecPress is a key press codeAn 8-bit value is returned when a key is pressed.0 = Unused.See keypadDef() for default press codes.cRelease is a key release code.An 8-bit value is returned when a key is pressed.0 = Unused.cCntHold is a hold tick, which is approximately one debounce period or 5 μs.How long to hold before repeating.0 = No Repeat.cSpdLo is a low-speed repeat tick, which is approximately one debounce period or 5 μs.How many times to repeat.0 = None.cCntLo is a low-speed hold tick, which is approximately one debounce period or 5 μs.How long to hold before going to high-speed repeat.0 = Slow Only.void keyInit(void);void keyConfig(char cRaw, char cPress,char cRelease, char cCntHold, char cSpdLo,char cCntLo, char cSpdHi);[0] [1] [2] [3][4] [5] [6]
