User’s Manual 435.1.1 Developing Programs Remotely with Dynamic CDynamic C is an integrated development environment that allows you to edit, compile,and debug your programs. Dynamic C has the ability to allow programming over theInternet or local Ethernet. This is accomplished in one of three ways.1. RCM3365 RabbitCore modules that are preloaded with Dynamic C RabbitSys firm-ware can be used with Dynamic C RabbitSys to be accessed via an Ethernet connectionfor remote application updates, and for remote monitoring and control. Dynamic CRabbitSys requires Dynamic C version 9.30 or later, and allows the RCM3365. TheDynamic C RabbitSys User’s Manual provides complete information on RabbitSys.2. Via the Rabbit RabbitLink, which allows a Rabbit-based target to have programs down-loaded to it and debugged with the same ease as exists when the target is connecteddirectly to a PC.3. Dynamic C provides sample programs to illustrate the use of a download manager, butthese sample programs are not intended for use with the NAND flash on the RCM3365and RCM3375 RabbitCore modules. The DLM_TCP.C and DLP_TCP.C sample pro-grams found in the Dynamic C SAMPLES\DOWN_LOAD folder, are intended to be com-piled to the program flash memory (which is a parallel flash memory). Customapplications based on these sample programs may use the NAND flash for data storage.
