Racelogic PerformanceBox Manual

Also see for PerformanceBox: Quick start guide

Contents

Racelogic PerformanceBox Manual Manual pdf 63 page image

Racelogic Ltd PerformanceTools Software02/05/2014 Page 63Performance ResultsAcceleration and deceleration results can be easily extracted from your logged data by usingthe various performance results tools. These are available by clicking on the ‘Accel results’and ‘Decel results’ buttons on the Toolbar.You can extract speed or distance data for acceleration and deceleration runs. Most of thetests use standard parameters (such as 0-60 or 0-100) but custom results can also beproduced.Producing Acceleration ResultsAcceleration data can be produced and shown in a results table from thecurrently loaded data file by selecting one of the acceleration test options withinthe ‘Accel results’ drop down menu. Click on the ‘Accel results’ button to open alist of the following options: 0-VMax: This will tabulate speed, time and distance data, starting each timethe velocity data has a value of zero up to the maximum speed reachedduring that acceleration period. 0-100 kmh (0-60 mph): This will tabulate speed, time and distance data,starting each time the velocity data goes from zero up to a speed of 100 km/hreached during that acceleration period. 0-160 kmh (0-100 mph): This will tabulate speed, time and distance dataeach time the velocity data goes from zero up to a speed of 160 km/h reachedduring that acceleration period. 0-160-0 kmh (0-100-0 mph): This will tabulate speed, time and distance data,starting each time the velocity data goes from zero up to a speed of 160 km/hthen returning to 0 km/h reached during that acceleration - deceleration period. 100-200 kmh (60-130 mph): This will tabulate speed, time and distance data,starting each time the velocity data goes from 100 kmh up to a speed of 200km/h reached during that acceleration period. 440 m: This will tabulate speed, time and distance data, starting from zero toa total distance of 440 m. 18.7 m: This will tabulate speed, time and distance data, starting from zero toa total distance of 18.7 m. 100 m: This will tabulate speed, time and distance data, starting from zero toa total distance of 100 m. Custom: This will tabulate speed, time and distance data, starting over acustom defined speed range e.g. 0-100-0 kmh.For each of the test ranges the results table will show Speed, Time, and Distance in10Kph or 10Mph steps.