Radio Shack 12-817 Owner's Manual

Contents

72. Insert the Adaptaplug’s twin connectorsinto the adapter cord’s smaller end so itreads TIP + POS.3. Insert the adapter’s barrel plug into theradio’s DC 4.5V jack.4. Plug the adapter into a standard ACoutlet (for AC power) or a vehicle’s ciga-rette-lighter socket (for DC power).CONNECTING THEEARPHONEFor private listening, insert the 1 /8 -inch (3.5mm) plug of the supplied mono earphone(stored in the battery compartment) into theearphone jack on the side of the radio.Note: Connecting the earphone automatical-ly disconnects the built-in speaker.Listening SafelyTo protect your hearing, follow these guide-lines when you use the earphone.• Do not listen at extremely high volumelevels. Extended, high-volume listeningcan lead to permanent hearing loss.• Set the volume to the lowest settingbefore you begin listening. After you