10 11– Signal Stalker II.PSE (Pause) – Stop and restart a search or tune.– Search the preprogrammed marine bank.– Search the preprogrammed fire/police bank.– Search the preprogrammed aircraft bank.– Search the preprogrammed amateur radio bank.– Search the preprogrammed weather bank, or holdto jump to the Skywarn channel. (First, program your localSkywarn frequency into channel 200).SCAN / MAN (Manual) – Press to scan programmedchannels. Press again to monitor a single channel. – Select the direction for searching and scanning.PRI / ALERT – Set the priority feature, or set SAMEstandby mode when monitoring a weather channel.0–9 – Input numbers or select banks (0 selects bank 10).The number range above the keys (1–20, 21–40, 41-60,etc.) indicates the channels stored in that bank.• / DELAY – Input a decimal point or set a channel delay.ENT (Enter) – Complete the entry of a frequency.L/O / L/O RV W – Lock-out selected channels orfrequencies. Review locked-out frequencies.TUNE / CLEAR – Enter Tune search. Clear an incorrectentry.PGM – Program frequencies into channels.– Locks (and unlocks) the keypad to preventaccidental entries; turns the backlight on and off.Understanding the KeypadTurning Off the Key ToneThe scanner is preset to sound a tone each time youpress one of its keys.To turn the key tone on and off:1. Turn on the scanner. WELCOME SCAnnInGrECEIVEr appears.2. While the welcome message is on the screen,press 1 to turn on the key tone or press 2 to turnit off.