Configuration Chapter 7RADWIN 2000 User Manual Release 2.6.50 7-12Figure 7-11: Services and Rates dialogTo choose Services, see the corresponding Installation procedure in Chapter 5.If you are using a link that -• is non-collocated• is Ethernet-only• uses model RADWIN 2000 C ODUsthen you may use Asymmetric Allocation. You may change the capacity allocation here thesame way as during installation. In place of the IDU box in Figure 7-11, you will see theAsymmetric Allocation slider:The procedures for setting the Jitter Buffer and Hot Standby parameters are also the same asthe corresponding procedures in Chapter 5.Click Next to continue.Step 7, TDM Clock ConfigurationThe following dialog is displayed:
