RADWIN 2000 User Manual Release 2.6.50 21-1Chapter 21Changing the FactoryDefault BandWhy this is NeededAll ODUs supplied by RADWIN come with pre-configured with a factory default product-dependent band according to the ODU part number.For ODUs supporting Multi-band, it may be changed using the procedure in this chapter. Theprocedure is generic, applying to all ODUs with the Multi-band feature.Required EquipmentThe minimal equipment required to change an ODU default band is:• Laptop computer (managing computer) satisfying the requirements of Table 4-1.• An installed copy of the RADWIN Manager• A PoE device• An Ethernet LAN cable• An IDU-ODU cableThe procedureTo change the factory default band:1. Using the IDU-ODU cable, connect the PoE device to the ODU, ensuring that thecable is plugged into the PoE port marked P-LAN-OUT.Caution• If for some reason the default band needs to be changed, it shouldbe done before link installation.• Use of an incorrect band may be in violation of local regulations.NoteThe following procedure is generic to all relevant RADWIN radio products.What you see on your running RADWIN Manager may differ in some detailsfrom the screen captures used to illustrate this chapter.
