Rae MiniRAE 2000 PGM-7600 Operation And Maintenance Manual

Contents

Rae MiniRAE 2000 PGM-7600 Operation And Maintenance Manual Manual pdf 71 page image

PROGRAMMING4-334.7.8 Change LampThere are three UV lamps with different photon energiesavailable for the PID sensor: 9.8 eV, 10.6 eV and 11.7 eV. Theuser can select any one of the lamps from the programmingmode.1. “Change Lamp Type?” is the eighth sub-menu item in theMonitor Setup menu (Table 4.7).2. Press the [Y/+] key; the display shows the current PID lampselection.3. Press the [Y/+] key to accept the currently displayed lamp.Press [N/-] key to scroll through the sub-menu for otherlamp selections. Press [MODE] to exit this sub-menu andreturn to the next sub-menu in Table 4.7.4. If there is any change to the existing selection, the displaywill show “Save?” Press [Y/+] to save the new selection orpress [N/-] or [MODE] to discard the change and return tothe next sub-menu in Table 4.7.