UltraRAE 3000 User’s Guide22.6.4 Datalog TypeThe instrument has three datalog types:Auto Default mode. Collects datalog information when theinstrument is sampling.Manual Datalogging occurs only when the instrument’sdatalogging is manually started (see below fordetails).Snapshot Datalogs only during single-event capture sampling.Note: You can only choose one datalog type to be active at a time.1. Press [N/-] to step from one option to the next.2. Press [Y/+] to make your selection (the dark circle in the “radiobutton” indicates “on”).3. When you have completed your selection, press [MODE].You will see two choices: Save and Undo. You have the opportunityto register the new settings or to change your mind and revert to yourprevious settings.• Press [Y/+] to save the changes.Press [N/-] to undo the changes and revert to the previous settings.22.6.5 Manual DatalogWhen the instrument is set to Manual Datalog, you turn dataloggingon and off by stepping through the displays from the Main Display,and then pressing the keys to select datalog on/off functions.• When you reach the screen that says “Start Datalog?” press[Y/+] to start it. You see “Datalog Started,” confirming thatdatalogging is now on.When you reach the screen that says “Stop Datalog?” press [Y/+] tostop it. You see “Datalog Stopped,” confirming that datalogging isnow off.76
