Rane HAL1x System Installation Manual
                                                                                                                                | |
Contents
| 
To locate a HAL device:1. In the application toolbar, click Connect.2. In the Connect to Device dialog box that appears, click the Locate button associated with the HALdevice you want to locate:To locate a peripheral device:1. Connect to the HAL device.2. Click the Hardware tab to open the Hardware Workspace.3. In the Hardware Workspace, click the Locate button associated with the peripheral device:Swapping Hardware DevicesYou've pulled all the shielded CAT 5e cable, terminated all the connections, installed and connected the HAL andall the EXPs, RADs and DRs, and have taken great pains to identify each cable that connects the EXPs, RADs andDRs to the HAL device. You fire up Halogen and discover to your horror that there are mismatches in the Hard-ware Workspace. You've connected some of the EXPs, RADs and/or DRs to the wrong ports. You installed thehardware in the right physical locations, but you simply connected them to the wrong ports on the back of theHAL or EXP.Your options? You could crawl around in the rack room disconnecting and reconnecting cables to ports, makingobsolete your neat and tidy cable dressing OR you could make a few clicks in the software and resolve the prob-lem while maintaining the integrity of your cable dressing and, more importantly, maintaining the integrity of theconfigured audio path, processing, presets, and control linking in the Processing Workspace—see warnings below.I don't know about you, but that second option sounds awfully appealing. The following procedure explains howeasy it is to do.HAL SYSTEM INSTALL GUIDE98 |
Related manuals for Rane HAL1x
manualsdatabase
Your AI-powered manual search engine