Rane HAL1x System Installation Manual
                                                                                                                                | |
Contents
| 
System RequirementsTo use a HAL System, the following items are required:l You must have access to a computer running Microsoft Windows 7 or greater. The computer must also havean Ethernet port, which you use to connect the computer to the HAL device (either directly or via an Eth-ernet network via a shielded CAT 5e cable). This connection is necessary for using the Halogen software toload configuration information into the device and also for monitoring detailed status information. Note thatsome status information is visible on the hardware itself.l You must have administrative rights to install the Halogen software, but you do not need administrativerights to run the software.l Most RADs require two, three, or four-gang standard switchboxes (for installation into a wall). A DR1requires a one-gang switchbox, while a DR2 and DR3 require two-gang switchboxes. Switchboxes used forboth RADs and DRs must have a minimum depth of 2 1/4" (57 mm).Minimum Requirements for Running Halogenl Microsoft Windows 7 or greater (32 or 64-bit)l PC with 1.6 GHz Dual Core Processor (for example, Intel Core Duo, AMD Athlon X2)l 1 GB RAMl 2 GB available hard disk spacel Display Resolution: 1024x768, 24 bit colorl Ethernet adapter: 100baseTl DVD Drive for installation from DVD (or can install from Rane website)Recommendations for Best Performancel Microsoft Windows 7 or greater (32 or 64-bit)l PC with mid-level processor @ 2GHz multi-core or better (for example, Intel i3 or greater)l 2 GB RAMl 2 GB available hard disk spacel Display Resolution: 1920 x 1080, 24-bit colorl Display Adaptor: supports rendering tier 1 or 2 (see http://msdn.microsoft.com/en-us/library/ms742196.aspx)(i.e. directX 9.0 or greater)l Ethernet adapter: GigabitCHAPTER 1: Getting Started7 |
Related manuals for Rane HAL1x
manualsdatabase
Your AI-powered manual search engine