Rangemaster 110 Ceramic User's Manual & Installation Instructions

Also see for 110 Ceramic: User guide User guide User's guide & installation instructions User guide

Rangemaster 110 Ceramic User's Manual & Installation Instructions Manual pdf 31 page image

INSTALLATIONCheck the appliance is electrically safe when you have finished.27ArtNo.350-0012 - Securing the plinthArtNo.350-0010 - Fitting the plinth 1 (Kitchener)ArtNo.350-0011 - Fitting the plinth 2 (Kitchener)Outer plinthOuter plinth fixing screwInner plinthArtNo.215-0026 - Handle gaskets fixedArtNo.215-0027 - Elan handle blanking plugsArt No 215-0028 - Handrail fascia fixingsFinal FittingFitting the Handles and Handrail (depending onmodel)Remove the 4 mm Allen screws from the doors (Fig. 7.10). Fitthe door handles and secure using the 4 mm screws.nn The handles should be above the fixings.Elan only: Fit the plastic blanking plugs to the fixing holes(Fig. 7.11).Remove the 4 mm Allen screws from the top corners of thefascia (Fig. 7.12). Fit the front handrail in position and secureusing the 4 mm screws.Fitting the 1-piece PlinthLoosen the three screws along the front bottom edge of thecooker. Hook the central keyhole over the central screw. Twistand fit each end keyhole over their respective screws. Tightenthe fixing screws (Fig. 7.13).Fitting the 2-piece Plinth (Classic Deluxe only)Fit the inner plinth to the bottom front of the cooker usingthe 4 screws provided (Fig. 7.14).Fit the outer plinth (2 screws, 1 each end) to the inner plinth.The height of the outer plinth can be adjusted by sliding it upor down via the slotted hole (Fig. 7.15).Fitting the Splashback (optional)Position the splashback on the rear of the hotplate and securewith the screws supplied.Customer CareInstaller: Please complete your details in this guide, informthe user how to operate the cooker and hand over theinstructions.Thank you.Fig. 7.10Fig. 7.11Fig. 7.12Fig. 7.13Fig. 7.14Fig. 7.15