Rangemaster 110 User's Manual & Installation Instructions

Also see for Classic 110: User guide User guide Installation and user guide User guide & installation & service instructions User's guide & installation instructions

Rangemaster 110 User's Manual & Installation Instructions Manual pdf 16 page image

16Moving your cookerSwitch off the electricity supply.The cooker is heavy, two people may berequired to move it. The cooker is fittedwith one roller at the front and two atthe back. There are also two screwdown levelling feet at the front.The front roller, designed for moving thecooker can be wound down. The levelling toolwhich controls this roller is in the storagedrawer compartment.Remove the storage drawer (by pullingit right out and lifting it up slightly)and you should see the levelling tool.Your installer may not have left the levellingtool in place. If not, locate it as shown. If youcannot find the levelling tool, contact yourinstaller. See the inside front cover of yourINSTALLATION GUIDE.Turn the levelling tool clockwise, twofull (180º) turns. It will be stiff. Thefront of the oven will rise slightly as theroller drops down.Open the grill door and right hand oven doorso that you can get a good grip on the bottomof the fascia panel as you move the oven.Do not move the oven by pulling thehand rail, door handles or knobs.Move the oven a bit at a time, checking behindit to make sure the gas hose is not caught. Makesure both electricity and gas cables havesufficient slack to move the cooker forward asyou go along.If a stability chain is fitted, release it asyou ease the cooker out.When you replace the cooker, wind it down offthe rollers by turning the levelling tool anti-clockwise. This is important. It will stop thecooker moving accidentally, while in use.