Rangemaster Classic 60 Ceramic User Manual

Also see for Classic 60 Ceramic: User guide User guide

Contents

Rangemaster Classic 60 Ceramic User Manual Manual pdf 24 page image

INSTALLATIONCheck the appliance is electrically safe when you have finished.22PEL NFig.7-3 Electrical ConnectionThis appliance must be installed by a suitably qualifiedelectrician to comply with the relevant electrical regulations,and also the local electricity supply company requirements.Current Operated Earth Leakage BreakersThe combined use of your cooker and other domesticappliances may cause nuisance tripping, so werecommend that the cooker is protected on an individualRCD (Residual Current Device) or RCBO (Residual CurrentBreaker with Overload).IF IN DOUBT, PLEASE CONSULT A SUITABLYQUALIFIED ELECTRICIAN.nn WARNING: THE APPLIANCE MUST BE EARTHED.Note: The cooker must be connected to the correct electricalsupply as stated on the voltage label on the cooker, througha suitable cooker control unit incorporating a double-poleswitch, having a contact separation of at least 3 mm in allpoles.nn The cooker MUST NOT be connected to an ordinarydomestic power point.Connect the mains cable to the correct terminals for yourelectrical supply type (Fig.7-3). Check that the links arecorrectly fitted and that the terminal screws are tight. Securethe mains cable using the cable clamp.Final ChecksHob CheckCheck each cooking zone in turn. Be sure to use pans of thecorrect size and material.Grill CheckTurn on the grill control and check that the grill heats up.Oven CheckSet the clock as described earlier, and then turn on the ovens.Check the oven fans start to turn and that the ovens heat up.Customer CareInstaller: Please complete your details in this guide, informthe user how to operate the cooker and hand over theinstructions.Thank you.