Rangemaster Elite SE 110 Dual Fuel User's Manual & Installation Instructions

Also see for Elite se 110: User's guide & installation instructions User's guide & installation instructions

Rangemaster Elite SE 110 Dual Fuel User's Manual & Installation Instructions Manual pdf 27 page image

INSTALLATIONCheck the appliance is electrically safe and gas sound when you have finished.23ArtNo.010-0004 Moving the cookerFig.7-5Fig.7-6Fig.7-4Moving the Cookernn On no account try and move the cooker while it isplugged into the electricity supply.nn The cooker is very heavy, so take great care.We recommend that two people manoeuvre the cooker.Make sure that the floor covering is firmly fixed, or removed,to prevent it being disturbed when moving the cookeraround.To help you, there are two levelling rollers at the back, andtwo screw-down levelling feet at the front.Remove the polystyrene base pack. From the front, tiltthe cooker backwards and remove the front half of thepolystyrene base (Fig.7-4).Repeat from the back and remove the rear half of thepolystyrene base.Lowering the Two Rear RollersTo adjust the height of the rear of the cooker, first fit a 13 mmspanner or socket wrench onto the hexagonal adjustingnut (Fig.7-5). Rotate the nut – clockwise to raise – counter-clockwise to lower.Make 10 complete (360°) turns clockwise.Make sure you lower BOTH REAR ROLLERS.Completing the MoveUnfold the rear edge of the cardboard base tray. Open theoven doors so that you can get a good grip on the bottom ofthe fascia panel as you move the oven (Fig.7-6).Carefully push the cooker backwards off the base tray.Remove the base tray.Position the cooker close to its final position, leaving justenough space to get behind it.nn DO NOT use the door handles or control knobs tomanoeuvre the cooker.