Rangemaster Leckford 90 Induction User Manual

15ArtNo.300-0005 2BCminute minder settingEA BArtNo.300-0005 2BCminute minder settingA BC DThe clock must be set to the time of day before the ovenwill work.Setting the Clock1. Once the cooker is connected and switched on, thedisplay will start to flash.2. To set the time, turn the Timer (A) knob to the Clock(C) setting and back to the Manual (D) position. Thecentre dot will flash indicating the time can be set. Turnthe Adjusting (B) knob either clockwise or counter-clockwise (Fig. 3.1) to set the time.3. Once you have set the time, allow the centre dot to stopflashing, the time is now set.Setting the minute minderA Minute Minder (E) is a feature that can be set for a numberof minutes and sounds an alarm once the specified amountof time has elapsed.1. Turn the Timer (A) knob to the Minute Minder (E)setting – it should click into position (Fig. 3.2).2. Turn the Adjusting (B) knob to set the amount of timerequired. Minimum time 1 minute (Fig. 3.3).3. Turn the Timer (A) knob back to the Manual (D) settingto see the current time and the ‘Bell’ symbol on thedisplay.Cancel the timer alarmOnce the specified time has elapsed it will emit an alarm.There are two ways to cancel the alarm:1. Turn the Adjusting (B) knob counter-clockwise orclockwise (Fig. 3.4).2. Turn the Timer (A) knob to the Clock (C) or the MinuteMinder (E) setting, and back to the Manual (D) mode,to return to normal cooking (Fig. 3.4).NOTEIf the alarm is not manually switched off it will stop afterapproximately 2 minutes.When the Minute Minder is active the clock will not dimbetween the hours of 10 pm and 6 amArtNo.301-0007 2BCStopping the oven 1DA BECEA BFig. 3.1A – Timer knob, B – Adjusting knobFig. 3.2Fig. 3.3Fig. 3.43. 2 Button - rotary clock