Rangemaster Longstock 90 User's Manual & Installation Instructions

Also see for Longstock 90: User's guide & installation instructions

2Access to the mains terminal is gained byremoving the electrical terminal cover box onthe back panel. Connect the mains cable to thecorrect terminals for your electrical supply type(Fig. 1.1 and Fig. 1.2). Check that the links arecorrectly fitted and that the terminal screws aretight. Secure the mains cable using the cableclamp.Minimum temperature rating T105.Read the instructions before installing or usingthis appliance.Gas Connection Safety• This cooker is a Class 2 Subclass 1appliance.• This appliance can be converted for use onanother gas.• Before installation, make sure that thecooker is suitable for your gas type andsupply voltage. See the data badge.• DO NOT use reconditioned orunauthorised gas controls.• Disconnect from the electricity and gassupply before servicing.• When servicing or replacing gas-carryingcomponents disconnect from thegas supply before starting operation.Check the appliance is gas sound aftercompletion.• Make sure that the gas supply is turnedon and that the cooker is wired in andswitched on.• In your own interest and that of safety, it islaw that all gas appliances be installed by aqualified person(s).• An appliance for use on LPG must not beinstalled in a room or internal space belowground level, e.g. in a basement.ArtNo.130-0010 Electrical connections single-phaseLN230 V ac 50 Hz10 mm² max6 mm² maxL1NL3L23N ac230/400 V 50 Hz6 mm² max10 mm² max6 mm² maxFig. 1.1Fig. 1.2