CHAPTER 2: I NSTALLATION 17Installing and Launching MPC1. To launch MPC from a machine running any browser except Internet Explorer, typehttp:// into the address line, where is the IP address of yourRaritan device. Please note that the MPC applet will launch in a new window that does notcontain a Menu bar, Tool bar, Scroll bar, or Address bar. Work in this window and toggle toother open windows using the command ALT+TAB.2. When MPC launches, a device tree of all automatically detected Raritan devices found onyour subnet is displayed on the left side of the screen. If you do not find your Dominion unitlisted by name, create an icon manually by selecting Connection Æ New Profile. The AddProfile window appears.3. Type a device Description, specify a Connection Type, and add the Dominion unit’s IPAddress, and click OK. These specifications can be edited later, as described in theMPC/RRC User Guide (http://www.raritan.com/support/sup_prdmanuals.aspx).4. In the Navigator panel on the left of the screen, double-click on the icon that corresponds toyour Dominion unit.To install MPC as a standalone applet, please see Appendix A in the Raritan Multi-PlatformClient and Raritan Remote Client User Guide.Important: Regardless of the browser you use, you must allow pop-ups fromthe Dominion device’s IP address in order to launch MPC.Installing and Launching RRCImportant: RRC works only with MS Internet Explorer. If you are using adifferent Web browser, MPC automatically loads, instead of RRC.1. Log on to any Windows-based computer with network access to your Dominion device.2. If you are using Windows NT, 2000, XP, or 2003, ensure that you are not a “restricted” user.3. Launch Microsoft Internet Explorer (ensure that your Internet Explorer security settings allowthe download and execution of ActiveX controls).Note: The IE default security setting of Medium is sufficient.4. In the Internet Explorer Address bar, type the IP address you assigned to your Dominiondevice the previous section, Initial Configuration. Press ENTER to load and launch RRC.Figure 10 RRC Connection Window
