54 DOMINION KX USER G UIDEOnce outlets have been assigned, Remote Power Management to the associated server will beavailable through RRC.Note: Be sure to assign the correct outlets to each channel. If more than one outlet is physicallyassociated with a different server, you could accidentally switch OFF the wrong server.Power Strip ManagementTo view Power Strip Properties; name, model, number of outlets, and serial number:• Right-click on the Power Strip channel / icon in the Device Tree.Figure 40 Power Strip Properties WindowOR• On the View menu, click Power Strip. When the Power Strip View window of connectedPower Strips appears, select a Power Strip in the list, right-click on it, and click Properties.− A list of the Power Strip’s outlet appears under it. Select and right-click on an outlet, thenclick Properties, to view the outlet’s Properties window. In this window, you canchange the outlet’s name (as shown in the Power Strip View window), view the devicetype that is plugged into that outlet (either an associated Paragon Target, or a non-associated Appliance), and delete any previously made associations.Figure 41 Power Strip View Window
