Chapter 5: Using the KVM Client64Note: For detailed information of each USB profile, see the section titled"Available USB Profiles" in the user documentation of the KX III KVMswitch, which is accessible from the KVM switch application or theRaritan website's Support page (http://www.raritan.com/support/).Audio DeviceThe User Station supports end-to-end, bidirectional, digital audioconnections with a target server for digital audio playback and capturedevices.One of the following CIMs must be used: D2CIM-DVUSB D2CIM-DVUSB-DVI D2CIM-DVUSB-HDMI D2CIM-DVUSB-DPThere are two methods to connect audio devices to a specific targetserver: Always automatically establish the audio connection when accessingthis target server. See Configuring KVM Ports (on page 33). Manually establish an audio connection using the KVM Client toolbar.See Connecting Audio Devices (on page 64).Connecting Audio DevicesIf an audio device is physically connected to the User Station, you canvirtually connect it to the target server.Note: Prior to connecting the audio devices to the target server, you mayhave to specify the audio devices you want to use. Per default, thefront-panel analog speakers and microphone are used. See AudioSettings (on page 82).To connect an audio device to the target server:1. Click to open the "Connect Audio and Mass Storage Devices"dialog.
