Chapter 7: KX III Local Console - KX III End User Help96KX III Local Console Factory ResetNote: It is recommended that you save the audit log prior to performing afactory reset.The audit log is deleted when a factory reset is performed and the resetevent is not logged in the audit log. For more information about savingthe audit log, see Audit Log.To perform a factory reset:1. Choose Maintenance > Factory Reset. The Factory Reset pageopens.2. Choose the appropriate reset option from the following options: Full Factory Reset - Removes the entire configuration and resetsthe device completely to the factory defaults. Note that anymanagement associations with CommandCenter will be broken.Because of the complete nature of this reset, you will beprompted to confirm the factory reset. Network Parameter Reset - Resets the network parameters ofthe device back to the default values (click Device Settings >Network Settings to access this information).3. Click Reset to continue. You will be prompted to confirm the factoryreset because all network settings will be permanently lost.4. Click OK proceed. Upon completion, the KX III device isautomatically restarted.Resetting the KX III Using the Reset Button on the DeviceOn the back panel of the device, there is a Reset button. It is recessed toprevent accidental resets (you need a pointed object to press thisbutton).The actions that are performed when the Reset button is pressed aredefined on the Encryption & Share page. See Encryption & Share inonline help.Note: It is recommended that you save the audit log prior to performing afactory reset.The audit log is deleted when a factory reset is performed and the resetevent is not logged in the audit log. For more information about savingthe audit log, see Audit Log.To reset the device:1. Power off the KX III.
