Rascal 600T Owner's Manual

Rascal 600T Owner's Manual Manual pdf 28 page image

Rascal R600 Scooter Owner’s ManualEMC Part: 19271200 • Rev. 03 • 06/01/2003235. Pull out the Quick-Disconnect Pin.6. Carefully rotate front end downward, away from rearsection, as shown in Illustration 15. Only rotatepartially down (less than 60°) to avoid damagingsurfaces of scooter. Lift front section away and setaside.Illustration 15 — Removing Front Section7. Position the Model 600C front section onto rearsection and align Quick Disconnect pin locations onfront and rear. Replace Quick Disconnect Pin,ensuring that it goes through and locks at bothlocations, front and rear. Route wiring harnessthrough Harness Guide and re-connect, as shown inIllustration 14.8. Lower scooter onto all four wheels. Position footplateas required. Install tiller. Test before using.FRONTSECTIONREARSECTION19271200/1560°