Raven AutoBoom Installation Manual

Also see for AutoBoom: Installation manual Installation manual Installation manual Installation manual Installation manual

Contents

Raven AutoBoom Installation Manual Manual pdf 40 page image

Chapter 436 Bestway 2009 & Newer AutoBoom Installation Manual13. Install the straight end of the supplied hydraulic hose (P/N 214-1000-290) to the 90° end of the installedunion fitting.14. Connect the 90° end of the installed hydraulic hose to the fittings installed in the Left T Port of theAutoBoom hydraulic valve.Install the Left and Right Cylinder HosesFIGURE 6. Cylinder Hoses Installed1. Disconnect the machine’s cylinder up hoses from bottom of the tee fitting on the accumulators.2. Connect the machine’s left cylinder up hose to the fittings installed in Port LV of the AutoBoom valve.3. Connect the machine’s right cylinder up hose to the fittings installed in Port RV of the AutoBoom valve.4. Install the straight end of the supplied hydraulic hose (P/N 214-1000-563) on the installed fitting on thebottom of the left accumulator tee.5. Connect the 90° end of the installed hydraulic hose to the fittings installed in Port LC of the AutoBoom valve.6. Install the straight end of the supplied hydraulic hose (P/N 214-1000-563) on the installed fitting on thebottom of the right accumulator tee.7. Connect the 90° end of the installed hydraulic hose to the fittings installed in Port RC of the Autoboomvalve.8. Disconnect the machine’s existing hydraulic hoses from the top of the tee fittings on the accumulators.9. Disconnect the other end of the existing hydraulic hoses from the machine’s left and right tilt cylinders.10. Install the supplied hydraulic hose (P/N 214-1000-620) on the top of the tee fitting in the machine’s leftaccumulator.11. Connect the other end of the installed hydraulic hose to the machine’s left tilt cylinder.12. Install the supplied hydraulic hose (P/N 214-1000-620) on the top of the tee fitting in the machine’s rightaccumulator.13. Connect the other end of the installed hydraulic hose to the machine’s right tilt cylinder.