Raven AutoBoom Installation Manual

Also see for AutoBoom: Installation manual Installation manual Installation manual Installation manual Installation manual

Contents

Raven AutoBoom Installation Manual Manual pdf 42 page image

Chapter 436 Miller Nitro 2000 Series AutoBoom™ Installation Manual6. Install a 13/16” ORFS M/F 90° swivel elbow fitting (P/N 333-0012-067) on the 90° end of the installed teefitting.7. Install the straight end of the supplied hydraulic hose (P/N 214-1000-301) on the fitting installed on the 90°end of the tee fitting.8. Connect the 45° end of the installed hydraulic hose to the fittings installed in Port P of the AutoBoom valve.9. Locate and disconnect the tank hose from the right side of the machine’s hydraulic valve.10. Install a 13/16” ORFS M/M/F swivel run tee fitting (P/N 333-0012-028) in the tank port of the machine’shydraulic valve.11. Connect the machine’s tank hose to the opposite end of the installed tee fitting.12. Install a 13/16” ORFS M/F 90° swivel elbow fitting (P/N 333-0012-067) on the 90° end of the installed teefitting.13. Install the straight end of the supplied hydraulic hose (P/N 214-1000-301) on the fitting installed on the 90°end of the tee fitting.14. Connect the 45° end of the installed hydraulic hose to the fittings installed in Port T of the AutoBoom valve.Install Left and Right Cylinder HosesFIGURE 12. Cylinder Hose Installed1. Disconnect the hose from the machine’s left tilt cylinder accumulator.2. Install a 13/16” ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-028) on the left tilt cylinder.3. Reinstall the machine’s hose on the opposite end of the installed tee fitting.4. Install a 13/16” ORFS M/F 90° swivel elbow fitting (P/N 333-0012-067) on the 90° end of the installed teefitting.5. Install the straight end of the supplied hydraulic hose (P/N 214-1000-299) on the fitting installed on the 90°end of the tee fitting.Accumulator (Note: This illustrationshows a ball valve and various otherfittings attached to the accumulator. Theball valve and other fittings apply toUltraGlide Systems only. On PowerGlidePlus systems, install the tee fitting (P/N333-0012-028) directly on theaccumulator.)Left Cylinder Hose (P/N 214-1000-299)Machine’s Hose