Raven AutoBoom Installation Manual

Also see for AutoBoom: Installation manual Installation manual Installation manual Installation manual Installation manual

Raven AutoBoom Installation Manual Manual pdf 44 page image

Chapter 440 Spra-Coupe 7X60 (2010 & Newer) AutoBoom® Installation ManualConnect the Harness to the Boom Function ControlsAutoBoom Valve Connections1. Locate the LEFT PRESS and RIGHT PRESS connectors on the AutoBoom harness cable (P/N 115-0230-045 or 115-0230-085).2. Route the connectors to the AutoBoom valve (P/N 063-0131-125).3. Connect the LEFT PRESS connector to Port G1 on the AutoBoom valve.4. Connect the RIGHT PRESS connector to Port G4 on the AutoBoom valve.5. Locate the LEFT SOLENOID and RIGHT SOLENOID connectors on the harness cable.6. Connect the LEFT SOLENOID connector to Port 4A on the AutoBoom valve.7. Connect the RIGHT SOLENOID connector to Port 4B on the AutoBoom valve.8. Locate the LEFT PROP and RIGHT PROP connectors on the harness cable.9. Connect the LEFT PROP connector to Port 5A on the AutoBoom valve.10. Connect the RIGHT PROP connector to Port 13A on the AutoBoom valve.Boom Function Coil ConnectionsFIGURE 11. Machine’s Boom Function Controls11. Locate the machine’s boom function coils near the machine’s hydraulic valve.12. Disconnect the connector from the left tilt up coil.13. On the harness cable, locate the LEFT SOLENOID SENSE connectors.14. Isolate the connector labeled UP and connect it to the left tilt up coil via the installed boom sense adaptercable.15. Connect the down LEFT SOLENOID SENSE connector to the left tilt down coil via the installed boom senseadapter cable.16. Connect the RIGHT SOLENOID SENSE connectors to the machine’s right tilt up and right tilt down coils viathe installed boom sense adapter cables.Accumulator Power Connections1. On the AutoBoom harness cable (P/N 115-0230-079), locate the RIGHT ACCUMULATOR cableconnection.2. Connect the RIGHT ACCUMULATOR connection to the accumulator shut-off assembly coil connectorlocated on the rod-end of the right tilt cylinder.3. On the AutoBoom harness cable, locate the LEFT ACCUMULATOR cable connection.