Ravpower RP-WD009 User Manual
                           | |
05 / 06Power Button Press to turn on / off the FileHubSupport up to 2TB SDXCSupport USB flash and HDD drive data transfer(FAT32, exFAT, NTFS)Provide 1A output current to compatible devicesCharge the FileHubData transfer with Micro USB devicesPress to start copying and backing up datafrom the SD card to USB HDDPress and hold for 3 seconds to cycle through2.4GHz / 5GHz / 5GHz & 2.4GHz WiFi modesPress and hold for 5 seconds to reset to factorysettingsReset ButtonWiFi Mode ButtonSD to USBBackup ButtonSD Card SlotMicro USB PortUSB A PortInternet IndicatorTurns on whiteTurns offConnected to interentDisconnected from internetWork StatusWiFi IndicatorFlashesStops flashingTurns solidWork StatusInitiatingConnectingConnected to WiFi5G IndicatorTurns on 5G WiFi connectedWork StatusSD card reading or writingWork StatusSD card insertedUnable to back up or errorSD Card IndicatorTurns on whiteFlashes whiteTurns redWork Status≥ 30%< 30%< 10%ChargingShutting downBattary IndicatorTurns on whiteTurns on redFast flashes redBlinks every 2 secondsBlinks every 0.5 secondOperation GuideNote: The original file in your SD card will not be deleted.LED IndicatorsButton ControlAccess the Filehub1) One Key Backup1. Turn on the Filehub.2. Plug into your flash drive/ hard drive and SD card. Wait until theSD card indicator stops flashing and turns solid on.3. Press and hold the SD to USB backup button for about 5 secondsuntil the SD card indicator flashes again, indicating the Filehub isreading the SD card.4. Wait until the SD card indicator stops flashing, so the one-keybackup is completed.5. Now you can check your backup folder named “SD backup” inyour flash drive / hard drive via the app RAV FileHub. |
Related manuals for Ravpower RD-WD009
manualsdatabase
Your AI-powered manual search engine