Raymarine 150/400 Installation Manual

Also see for 150: Installation guide

Contents

Raymarine 150/400 Installation Manual Manual pdf 53 page image

Specifications 45SpecificationsCourse computer specificationsNominal supply voltage:Type 150/150GType 400/400G12 V DC (fuse protected at 30 A)12 V or 24 V DC (fuse protected at 40 A)Operating voltage range:Type 150/150GType 400/400G10 V to 16 V DC10 V to 32 V DCPower consumption (standby) 300 mAGyroPlus yaw sensor: • Type 150G/Type 400G: internal GyroPlus fitted onto circuit board• Type 150/Type 400: option of external GyroPlus or dealer-fitinternal GyroPlusOperating conditions:temperature rangerelative humidity limitwater protection-10°C to 55°C (14°F to 131°F)80%drip resistant when mounted verticallyStorage conditions:temperature rangerelative humidity limit-5°C to 50°C (23°F to 122°F)75%Dimensions:widthheightdepth307 mm (12.1 in)195 mm (7.7 in)70 mm (2.8 in)Weight 2.1 kg (4 lb 7.5 oz)Inputs fluxgate compass, external GyroPlus yaw sensor, rudder positionsensor, NMEA 0183 v2.3 (x2), SeaTalk (x2), off switch, power,drive solenoid returnOutputs NMEA 0183 v2.3 (x2), SeaTalk (x2), drive motor, drive clutchRaymarine drive compatibility:Type 150/150GType 400/400Gall Type 1 12 V and Type CR1 12V drives/pumpsall Type 1, Type 2 and Type 3 drives/pumps (drive voltage must matchboat’s supply voltage)Drive motor output:Type 150/150GType 400/400Gcontinuous 18 A at 12 Vcontinuous 30 A at supply voltage[specifications continue on next page]