Raymarine 150/400 Installation Manual

Also see for 150: Installation guide

Contents

Raymarine 150/400 Installation Manual Manual pdf 9 page image

Step 1: Check the Installation Kit 1Step 1Step 1: Check the Installation KitThe first step is to get ready for installation by:• reading through all installation steps• obtaining the necessary installation tools• checking the parts suppliedWARNING: Product installationThis equipment must be installed and operated in accordancewith the instructions contained in this handbook. Failure to do socould result in poor product performance, personal injuryand/or damage to your boat.Because correct performance of the boat’s steering is critical forsafety, we STRONGLY RECOMMEND that an AuthorizedRaymarine Service Representative fits this product. You willonly receive full warranty benefits if you can show that anAuthorized Raymarine Service Representative has installed orcommissioned this product.1.1 Read this handbookTo prepare for the system installation, read through the followinginformation and the rest of this handbook to familiarize yourself withthe autopilot system and how to install it.The autopilot system – core pack contentsCourse computerThe course computer lies at the heart of the autopilot system. Itprocesses information from the sensors in the system (e.g. rudderposition and compass) so it can steer the boat using the drive unit:• it contains a microprocessor, electronic circuitry to control thedrive unit and a power amplifier for the drive motor.• it is the central distribution point for the autopilot system, withterminals to take power from the boat’s distribution panel andinputs/outputs for all other autopilot components• it has inputs/outputs for SeaTalk and NMEA so you can connect itto Raymarine and other manufacturer’s equipment.