Raymarine DSM300 User Manual

Also see for DSM300: Installation manual Install guide

Contents

Raymarine DSM300 User Manual Manual pdf 27 page image

Chapter 3: System Setup 27Data BoxesPress the SELECT BOXES soft key to display the data box sub-menu. This enablesyou to select up to 6 data boxes that you can display on the sounder.Notes: (1)A fixed set of sixteen (nine in the monochrome displays) of these dataitems are available for display in the Nav Data half-screen window.(2)In addition to these grouped data boxes, boxes for the cursor readout,VRM/EBL data, waypoint data, MOB data and simulator status aredisplayed when selected or when the appropriate function is active.(3)Radar data is available only if radar equipment is installed and connected.Data boxes provide regularly used data in a compact form so that most of thegraphics can still be seen. The ones you select here can be turned on and off as agroup during normal operation, and you can also move them around the screenindividually using the context-sensitive cursor. See “Viewing Data Boxes” onpage 50.Bearing ModeThe mode (magnetic or true) of all the bearing and heading data displayed. This isindicated in the radar status bar after the heading value, if displayed.TIME FORMAT 12 HOUR or 24 HOUR 12 HOURTIME OFFSET UTC, or local offset value:Plus or minus up to 12 hours, inwhole hoursUTCGPS SOG/COG FILTER HIGH, MEDIUM, or LOWCOMPASS SET UP LINEARISE COMPASS orALIGN HEADINGLANGUAGE English (UK), English (US), Dan-ish, French, German, Dutch,Icelandic, Italian, Norwegian,Portuguese, Spanish, Swedish,or FinnishEnglish (US)SIMULATOR OFF, DATA, RADAR, or BOTH OFFTable 3-1: System Set Up ParametersMenu OptionsFactoryDefaultNewSetting