Raymarine G-Series Installation Instructions Manual
Also see for G-Series system: Installation & commissioning instructionsQuick reference guideQuick referenceInstallation instructionInstallation instructions
      | |
Keyboard connectionsThe G-Series Keyboard communicates using the SeaTalk ng system.It may be connected directly to the backbone (wired) or usedremotely with a separate basestation and wireless upgrade kit.Note: You should have at least one permanently wired keyboard. Inthe event that any wireless keyboards are lost, the wiredkeyboard can be used to control the system.Schematic diagramWhen connecting a keyboard to the system, record its details onyour system/schematic diagram. You will need this information dur-ing commissioning. (Refer to the separate G-Series systeminstallation instructions for sample diagrams.)Keyboard connection details Keyboard cablesORSeaTalk ng instrument, e.g. ST70SeaTalk ngspurSeaTalk ngspurKeyboardSeaTalk ng backboneD10070-1Cable PartNumber NotesKeyboard to SeaTalk ng400 mm (15.75 in)SeaTalkng spur cableA060381 m (3.3 ft)SeaTalkng spur cable*A06039* Suppled with the keyboard3 m (9.8 ft)SeaTalkng spur cableA060405 m (16.4 ft)SeaTalkng spur cableA06041 |
Related manuals for Raymarine G-Series system
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine