Raymarine Quantum 2 Installation Instructions Manual

Also see for Q24D: Installation instructions

Contents

Raymarine Quantum 2 Installation Instructions Manual Manual pdf 21 page image

3.2 Required additional componentsThis product forms part of a system of electronics and requires the following additional componentsfor full operation.• Compatible Raymarine multifunction display. Refer to for a list of compatible multifunction displays.• Optional data cable. Refer to Chapter 10 Spares and accessories for suitable cables and adaptorsfor existing cable installations. (The Quantum™ scanner is Wi-Fi-enabled, and can be operatedwithout a fixed data cable.)• Use of the Doppler Radar features requires the following data sources to be available on yoursystem (e.g. connected to your multifunction display, via SeaTalkng ® or NMEA 0183). For moreinformation refer to: Doppler data source requirements.• Use of the MARPA Radar features requires the following data sources to be available on yoursystem (e.g. connected to your multifunction display, via SeaTalkng ® or NMEA 0183). For moreinformation refer to: MARPA data source requirements.Doppler data source requirementsUse of the Doppler Radar features requires the following data sources to be available on your system(e.g. connected to your multifunction display, via SeaTalkng ® or NMEA 0183):Data type Example data sourceCOG (Course Over Ground) GPS or GNSS receiver (internal or external).SOG (Speed Over Ground) GPS or GNSS receiver (internal or external).Heading Compass or Autopilot sensor providingFastheading data (e.g. Evolution EV-1 / EV-2).MARPA data source requirementsUse of the MARPA Radar features requires the following data sources to be available on your system(e.g. connected to your multifunction display, via SeaTalkng ® or NMEA 0183):Data type Example data sourceCOG (Course Over Ground) GPS or GNSS receiver (internal or external).SOG (Speed Over Ground) GPS or GNSS receiver (internal or external).Heading Compass or Autopilot sensor providingFastheading data (e.g. Evolution EV-1 / EV-2).Operation instructionsFor detailed operation instructions for your product, refer to the documentation that accompaniesyour display.Retain your Wi-Fi passcodeTo connect to the Radar using Wi-Fi (wireless), you will need to know the unit’s SSID, and Passcode.Both the SSID and Passcode are provided on the serial number label on the underside of the unit,and on spare serial number labels supplied in the box. You may wish to make a separate note ofthis information and keep in a secure location. You should also keep the Radar scanner packagingin a safe place for future reference.Planning the installation 21