10.5 RayNet to RJ45 adapter cablesDescription Typical use Quantity1 Adapter cable with a RayNet(female) socket on oneend, and a waterproof(female) socket on theother end accepting thefollowing cables with anRJ45 SeaTalkhs waterprooflocking (male) plug:• A62245 (1.5 m).• A62246 (15 m).A typical use for this adapter cable is toconnect a DSM300 sonar module to aLightHouse MFD, using all-waterproof cableconnections. This adapter cable will alsoaccept the following RJ45 SeaTalkhs cables,although the RJ45 plug that connects at theequipment end (e.g. DSM300) will NOT bewaterproof:• E55049 (1.5 m).• E55050 (5 m).• E55051 (10 m).• A62135 (15 m).• E55052 (20 m).12 Adapter cable with a RayNet(female) socket on one end,and a waterproof (female)RJ45 socket on the otherend, along with a lockinggland for a watertight fit.Directly connect a Raymarine radar scannerwith an RJ45 SeaTalkhs (male) cable toa RayNet network switch (e.g. HS5) orLightHouse MFD.13 Adapter cable with a RayNet(male) plug on one end,and an RJ45 SeaTalkhswaterproof (male) plug onthe other end.Connect a legacy G-Series GPM-400, C-SeriesWidescreen or E-Series Widescreen MFD toa Raymarine radar scanner supplied with aRayNet power / data cable.194
