Raymarine ST6002 Operating Manual

Also see for SmartPilot ST6002: Commissioning Guide Quick reference guide Quick reference guide Operating guide

Contents

Raymarine ST6002 Operating Manual Manual pdf 21 page image

Chapter 1: SmartPilot Operation 112. Press the disp button to cycle through the possible illumination settings:LAMP 3 (the brightest setting), LAMP 2, LAMP 1, OFF, LAMP 1,LAMP 2, LAMP 3 and so on:• as you change the setting, the illumination on any other SeaTalk instru-ments or control units will also change.3. The display automatically returns to the previous mode if you do not press abutton for 10 seconds:• if you press another mode button within 10 seconds you will select themode assigned to that button (for example: auto selects Auto mode,standby selects Standby mode).Notes: (1)You can also adjust the lighting level from any other SeaTalk instrumentor control unit.(2)When you switch off the unit you lose any changes you have made tothe lighting level.How do I adjust the contrast?To set the display contrast level:1. With the autopilot in Standby mode, press the disp button for one second toaccess the LAMP screen.2. Press the disp button for one second again, to display the CONTRASTscreen.3. Use the up and down arrow buttons to set the required contrast level (from1 to 15).4. The display automatically returns to the previous mode if you do not press abutton for 10 seconds:Note:if you press another mode button within 10 seconds you will select the mode as-signed to that button (for example: autoselects Auto mode, standbyselects Standbymode).