Raymarine ST70 Instrument Installation Manual

Also see for ST70 Instrument: Installation guide Operating guide User reference guide User reference handbook Installation guide

Contents

Raymarine ST70 Instrument Installation Manual Manual pdf 6 page image

vi• Place Raymarine equipment and cables at least 3 ft (1 m) from any equipment thattransmits, or cables that carry, radio signals from VHF radios, cables and anten-nas. In the case of SSB radios, the distance should be increased to 7 ft. (2 m).• Place Raymarine equipment and cables more than 7 ft (2 m) from the path of aradar beam. A radar beam can normally be assumed to spread 20 degrees aboveand below the radiating element.• Use a power source separate from that used for engine-start. This is important toprevent erratic behavior and data loss which can occur if the engine-start does nothave a separate battery.• Use Raymarine-specified cables.• Do not cut or extend cables unless doing so is detailed in the installation manual.RememberWhere constraints on the installation prevent any of the above recommendations:• Always allow the maximum separation possible between different items of electri-cal equipment.This will provide the best conditions for good EMC performance of the installation.Suppression ferritesRaymarine cables may be fitted with suppression ferrites. These are necessary forcorrect EMC performance. Any ferrite removed during installation must be replacedas soon as installation is complete.Use only ferrites of the correct type, supplied by Raymarine authorized dealers.Connections to other equipmentIf Raymarine equipment is to be connected to other equipment using a cable notsupplied by Raymarine, a Raymarine suppression ferrite MUST always be attachedto the cable near the Raymarine unit.EMC Servicing and maintenance• Undue noise and interference may be a symptom of an EMC-related problem.Please report any EMC-related problem to your nearest Raymarine dealer. Weuse such information to improve our quality standards.• To minimize any EMC related problems and ensure the best possible perfor-mance form your Raymarine equipment, follow the guidelines given in the instal-lation instructions.Product documentsThe following user documents are available to help you install and operate an ST70instrument controller:• ST70 Instrument Installation Guide (this document).• ST70 Instrument Operating Guide.This is a detailed manual supplied with yourST70 instrument. It contains important commissioning instructions.• SeaTalkng Reference Manual. This provides detailed information regardingSeaTalkng connectivity.