Raymarine ST70 User's Reference Manual

Also see for ST70 Instrument: Installation guide Operating guide User reference guide User reference handbook Installation guide

Raymarine ST70 User's Reference Manual Manual pdf 22 page image

16 ST70 Instrument User Reference Manual4. Use < or > to select the required mode:• Select ON if you want to set a value for variation. if you choose this mode, thevalue you set will be applied to the rest of the system.• Select OFF if you do not want to apply a variation value to the system.• If SLAVE is displayed in the mode adjust box, the variation has been set atanother product in the system, and the value is shown in the lower adjust box.In this mode, you cannot change the variation value.5. If you selected the OFF or SLAVE mode, proceed from step 6. If you selected theON mode:i. Press to select the lower (value) box.ii. Use < or > to set the correct variation value.6. Press ENTER to save the value and return to the Advanced Options menu.7. Press CANCEL to return to the Main Menu.Now proceed to Changing response rate .Changing response rateThe response setting determines the rate at which data readings update. You canadjust the response at each instrument, to best suit the conditions under which youare operating. You can independently adjust the response at each instrument, forindividual data types.If you want to change the response at any instrument:1. With the Main Menu displayed, use < or > to scroll to Display Settings.2. Press ENTER to display the Display Settingsmenu.3. At the Display Settings menu, use < or > to scrollto the Response option.4. Press ENTER to display the Response menu,then use < or > to scroll to the required data type(Speed shown here).Press ENTER to selectDisplay SettingsResponsei Select display responseD10088-1Press ENTER to select.ResponseSpeedD10090-1