14.8 AIS target symbolsYour multifunction display shows a range of symbols to representthe different types of AIS target.Target type Description SymbolTransmitting target Target is moving or atanchor (Target is notactivated, dangerous orlost).Activated target Target activated —that is, AIS vectordisplayed. Vectorline (optional) showspredicted distancetravelled within a giventime.Selected target Target selected withcursor. Can viewdetailed data.Dangerous target Targets within specifieddistance (CPA) or time(TCPA). Dangeroustarget alarm sounds ifenabled. Target red andflashing.Uncertain target Calculated CPA / TCPAvalue uncertain.Lost target When the signal of adangerous target notreceived for 20 seconds.Target in latest predictedposition. Alarms soundsif enabled. Targetflashes.Buddy target Target has previouslybeenaddedtotheBuddyList.AidToNavigation(AToN)target (Real)AToN target is ONposition.AidToNavigation(AToN)target (Real)AToN target is OFFposition.AidToNavigation(AToN)target (Virtual)AToN target is ONposition.AidToNavigation(AToN)target (Virtual)AToN target is OFFposition.Land base station target Land base station targetis ONLINE.Search and rescuetransponders (SARTS)targetSARTS targetSearch and rescueaircraft (SARS) targetSARS targetMilitary and lawenforcement targetOnly displayed whenconnected to approvedSTEDS-EAIS AIShardware.14.9 Displaying detailed AIS targetinformationFrom the chart or radar application:1. Select an AIS target.The AIS target context menu is displayed.2. Select View Full AIS Data.AIS DataThe table below shows the AIS target information which if availablewill be displayed on the multifunction display:• Type• Status• Destination• Last Seen• ETA• MMSI• Call Sign• IMO No.• Length• Beam• Draught• Heading• ROT• Position• COG• SOG• CPA• TCPANote: Available data is dependant upon what information isbeing transmitted from the target vessel and the type of AIS unitconnected to your system.166 New a Series / New c Series / New e Series
