Using the Race TimerA count down Race Timer is available in the Chartapplication. Once the Race Timer reaches zero it willchange color and start to count up, after 10 secondsthe Race Timer will automatically be hidden from thescreen but continue to count up.From the Chart application’s Navigate menu:1. Select Race Timer.2. Select Show Race Timer in Chart.3. Select Countdown From:.4. Set the timer to the required value.The Race Timer can be set from 1 minute to 30minutes.5. Select Back to return to the Race Timer menu.6. Select Start to start the Race Timer countdown.• You can synchronize the Race Timer countdown by selecting Skip to Next Minute.• You can stop and reset the Race Timer byselecting Stop & Reset.7. With the Race Timer count down stopped, youcan hide the timer by selecting Hide Race Timer8. With the Race Timer hidden you can display itagain by selecting Show Race Timer in Chartfrom the menu.Using the Race Timer — TouchscreencontrolsThe Race Timer can be controlled by interacting withthe onscreen Race Timer.From the Chart application, with the Race Timerdisplayed:1. Touch the Race Timer to start the countdown.2. With the timer running you can select the RaceTimer to synchronize.3. Touch and hold the Race Timer to stop and resetthe countdown.14.8 Vessel position on the chartdisplayYour current position is represented on-screen bythe vessel symbol.The vessel symbols are only displayed whenheading or COG data is available.The vessel symbol varies depending on selectedsettings and the availability of heading data.MotorVesselThe motor vessel symbolis used when the vesseltype selected during theinitial set up wizard is amotor vessel.Sail Vessel The sail vessel symbolis used when the vesseltype selected during theinitial set up wizard is asail vessel.SmallVesselThesmallvesselsymbolisused when the Boat Sizesetting is set to Small.Black dot A black dot is displayedwhen heading and COGdata is not available.Vessel position data can also be shown in thedatabar.Locating your vesselThe vessel icon can be repositioned to the center ofthe screen by following the steps below.1. Select the Find Ship icon: located on theleft hand side of the screen.Locating your vesselThe vessel icon can be repositioned to the center ofthe screen by following the steps below.1. Select Menu.2. Select Find Ship.Chart application 173
