Menu item Description Options• Deep Fish Limit — Specifies the upper value for the Fish AlarmDepth Limit. • 2 ft (or equivalent units) to the maximum of thetransducer rangeDeep Fish Limit• 2 ft (or equivalent units) to the maximum of thetransducer rangeFuel Manager In the fuel manager alarm options you can switch the low fuel warningalarmonoroffandspecifythefuellevelatwhichthealarmistriggered.Low Fuel• On• Off (default)Fuel Level• 0 to 99999Guard Zone The Guard Zone feature in the radar application triggers an alarmwhen a target is within a specified zone. You can adjust the sensitivityof the alarm. Ensure that the sensitivity is not set too low, or targetsmay be missed and the alarm will not be triggered.Guard Zone Sensitivity• 1% to 100%Off Track When set to On, during active navigation an alarm is triggered whenyour vessel steers off-track more than the value you specify for the OffTrack XTE setting.Off Track Alarm• Off (default)• OnOff Track XTE• 0.01 to 9.99 nm (or equivalent units)Water Temperature When set to On, triggers an alarm when the water temperature isequal to or lower than the limit you specify for the Lower Temp Limitor equal to or greater than the limit you specify for the Upper TempLimit setting.Water Temperature• Off (default)• OnLower Temp Limit• 60 degrees fahrenheit (or equivalent units)• –09.9 to +99.7 degrees fahrenheit (or equivalentunits)Upper Temp Limit• 75 degrees fahrenheit (or equivalent units)• –09.7 to 99.9 degrees fahrenheit (or equivalentunits)Waypoint Arrival When you arrive at a waypoint, an alarm is triggered. This settingallows you to specify the distance from the target waypoint at whichthe alarm is triggered. The units used for this setting are based on theunits you specify for distance in the Units Set-up menu.0.01 to 9.99 nm (or equivalent units)Accessing the alarms menuFrom the homescreen:1. Select Set-up.2. Select Alarms.The Alarms menu is displayed.3. Select the appropriate alarm category.Alarms and Man over board functions 119
