Raytheon ec2011wa3059 Service Manual
                                                                | |
Contents
| 
12g WARNINGTo reduce the risk of electric shock, fire, explosion, serious injury or death:ï Disconnect electric power to the washer before servicing.ï Never start the washer with any guards/panels removed.ï Whenever ground wires are removed during servicing, these ground wires must bereconnected to ensure that the washer is properly grounded. W003379897. METER OR TIMER CASE ASSEMBLYa. METER CASE REMOVAL (Metered Models):1. Remove two control panel attachingscrews,Figure 5, and lay assembly forwardon protective pad on cabinet top.2. Disconnect timer harness from control hoodharness at disconnect blocks,Figure 6.3. Remove timer assembly, paragraph 6.4. Remove cap screw, lockwashers and nutholding meter case to end of control hood.5. Remove coin drawer.6. Remove shoulder screw from inside metercase.NOTE: When installing meter case, shoulderscrew must be installed in outer hole,Figure 8, toenable timer bracket to slide under screw head.7. Remove front panel, paragraph 10.8. Remove carriage bolts and locknutsholding meter case to cabinet top.9. Carefully remove meter case and gasketfrom cabinet top.b. TIMER CASE REMOVAL (NonmeteredModels):1. Remove timer from timer case,paragraph 6, step c.2. Remove two control panel attaching screwsand lay assembly forward on a protectivepad on cabinet top,Figure 5.3. Remove cap screw, lockwashers and nutholding timer case to control hood,Figure 12.4. Remove front panel assembly,paragraph 10.5. Remove two cabinet top hold down screws,Figure 16.6. Tape loading door closed and lift cabinettop to a vertical position.7. Remove carriage bolts, vinyl washers,lockwashers, and nuts holding timer caseto cabinet top.8. Support timer case and remove screw andfiber washer holding rear of case to cabinettop.Figure 12W240SE1ATIMERCASESCREWTIMER CASEATTACHING HARDWARE |
Related manuals for Raytheon ec2011wa3059
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine