COPYRIGHT © 2014 RED.COM, INCR E D D S M C M E D I A O P E R AT I O N G U I D E 955-0047, REV-E | 8MIXING CARBON FIBER AND ALUMINUM COMPONENTSThe structural mounting points for the carbon fiber media modules are optimized for the carbon fiber DSMCBRAIN, whereas the structural mounting points for the standard aluminum side SSD modules are optimized foruse with the standard aluminum DSMC BRAIN.Using a carbon fiber media module with an aluminum DSMC BRAIN or using an aluminum side SSD module witha carbon fiber DSMC BRAIN may lead to an unstable connection between the BRAIN and the module, whichcould affect data integrity.WARNING: Damage to the DSMC BRAIN, side SSD module, or other components of the DSMC system causedby mixing carbon fiber components with non-carbon-fiber components is not covered under warranty, and mayvoid the warranty for both the BRAIN and the side SSD module.SUMMARY OF CARBON FIBER RESTRICTIONSDO NOT attach any of the following side SSD modules to a carbon DSMC BRAIN: RED MINI-MAG SIDE SSD MODULE DSMC 1.8" SSD SIDE MODULE DSMC 1.8" SSD SIDE MODULE (DRAGON)DO NOT attach the following side SSD modules to a standard aluminum DSMC: Carbon Fiber RED MINI-MAG Side SSD Module DSMC 1.8" SSD SIDE MODULE (CARBON FIBER DRAGON)ADDITIONAL RESOURCESThe following resources offer additional information about RED, the DSMC system, and the RED community: RED.com: Check the official RED website for the latest information about RED products. RED Learn Articles: RED offers in-depth technical articles about RED cameras, post-production, and digitalcinematography. RED.com/downloads: Go to the RED Downloads page to download the latest firmware, operation guides,and post-production software. Support.red.com: Check the RED SUPPORT site for FAQs, or to file a support ticket. Reduser.net: Discuss all things RED on the REDUSER third-party forum.